An uninterruptible power supply (UPS), also known as a battery backup, provides backup power when your regular power source fails or voltage drops to an unacceptable level. A UPS allows for the safe, orderly shutdown of a computer and connected equipment. The size and design of a UPS determine how long it will supply power. UPS TopologiesDifferent UPS topologies provide specific levels of power protection. A CyberPower UPS will belong to one of these three topologies: standby, line interactive, and double-conversion. Standby is the most basic UPS topology. A standby UPS resorts to battery backup power in the event of common power problems such as a blackout, voltage sag, or voltage surge. When incoming utility power drops below or surges above safe voltage levels, the UPS switches to DC battery power and then inverts it to AC power to run connected equipment. These models are designed for consumer electronics, entry-level computers, POS systems, security systems, and other basic electronic equipment. A line interactive UPS incorporates technology which allows it to correct minor power fluctuations (under-voltages and over voltages) without switching to battery. This type of UPS has an autotransformer that regulates low voltages (e.g., brownouts) and over voltages (e.g., swells) without having to switch to battery. Line interactive UPS models are typically used for consumer electronics, PCs, gaming systems, home theater electronics, network equipment, and entry-to-mid-range servers. They provide power during such events as a blackout, voltage sag, voltage surge, or over-voltage. A double-conversion (online) UPS provides consistent, clean, and near perfect power regardless of the condition of incoming power. This UPS converts incoming AC power to DC, and then back to AC. UPS systems with this technology operate on isolated DC power 100 percent of the time and have a zero transfer time because they never need to switch to DC power. Double-conversion UPS systems are designed to protect mission-critical IT equipment, data center installations, high-end servers, large telecom installations and storage applications, and advanced network equipment from damage caused by a power blackout, voltage sag, voltage surge, over voltage, voltage spike, frequency noise, frequency variation, or harmonic distortion. UPS output waveformsCyberPower UPS systems have either sine wave or simulated sine wave output, depending upon the model.  Sine wave output: The highest quality waveform output is sine wave, which is a smooth, repetitive oscillation of AC power. Enterprise-level UPS systems produce sine wave power to operate sensitive electronic equipment. Sine wave output ensures that equipment utilizing Active PFC power supplies do not shut down when switching from utility power to battery power. Simulated sine wave output: An approximated sine wave output waveform. It uses pulse wave modulation to generate a stepped, approximated sine wave to supply more cost-effective battery backup power for equipment that does not require sine wave output. The technology used to produce this type of power output is less expensive to manufacture and is common in standby and line interactive UPS systems. Where can you learn more?CyberPower offers standby, line interactive, and double-conversion UPS solutions. Find information about our UPS systems here.
Uninterruptible power supplies (UPS’s) are used to prevent damage from power loss and common electric occurrences. UPS units are commonly used by companies that need to ensure minimal downtime to their resources as they ensure that during a brief power outage, a network device may continue to run. In short, business continuity tends to be the main focus…and for good reason. In this article, some of the additional benefits in running your network with uninterruptible power supplies are discussed. Prevent Damage to Equipment Power surges are not only inconvenient when it comes to managing a network, they can also potentially destroy resources. A powerful electrical surge has the potential to short out a router, switch, or entire server beyond repair. Having an uninterruptible power supply ensures that besides just maintaining a steady flow of power to the unit, the device will also be protected from damage by power surges that could ruin the electrical components of the device. Prevent Loss of Data It’s important to note that one of the most important ways to prevent loss of data is to backup your data frequently. You should have strong resources in place for backing up your data running on a schedule at all times. However, an additional consideration to prevent loss of data is installing an uninterruptible power supply, or multiple UPS’s for your network. While having a running backup system may keep you from losing too much data in a power failure, you still will experience some loss of data if the backup hadn’t been created immediately before the crash. Depending on how much data flows through your company, even a few minutes between the backup and the crash could result in a huge loss of data. This is why preventing the server or device from going down in the first place is essential with an uninterruptible power supply. In addition to knowing that your data is secure through the maintaining of regular backups, you will know that if there is a temporary power outage or surge, you won’t have to deal with the loss of any data. Save Time Imagine the last time you may have experienced a computer crash or had something happen while you were writing a document or working on something on the computer. Having to stop what you’re doing while your computer restarts is time consuming and it also makes it more difficult to get back to work. Having your system shut down and having to reboot to get back into your work is a hassle. Sometimes, hassles like these are caused from a power failure that only lasts a few minutes. Having a battery backup, or uninterruptible power supply, can make the biggest difference in situations like these due to the fact that while you are waiting for power to be restored, you may still be running your tasks without interruption. This also gives you the opportunity to save your data if you have not already done so. Prevent Connectivity Issues Uninterruptible power supplies are commonly used in protecting switches and routers from damage. The reason for this is that if there is a power surge or outage that affects the switch or router, an entire network can be taken down, affecting the ability of everyone working in that area, causing them to be unable to complete any work. Further, any current data transfers will be halted and data loss may occur. This is why having a UPS to protect your network equipment is beneficial in ensuring your work continues to get done even during times when such issues occur. Peace of Mind The final benefit relates to the state of mind present in individuals that know their personal or business resources are protected in the event of a crisis. An uninterruptible power supply is just one more way you can protect your IT environment and provide yourself the peace of mind in knowing that in the event of a crisis, your system will have the best chance of being protected and continuing to run. It’s important to consider the benefits of installing UPS’s in your network and how your network would be affected if those benefits weren’t present and some sort of power crisis affected your equipment. Knowing the potential for loss in such situations can help you decide if having battery backups can actually provide you the peace of mind and protection you deserve. Conclusion Take into account the benefits of installing an uninterruptible power supply or multiple units into your network when making the decision of whether or not it is worth it for your business or personal needs. While installing multiple uninterruptible power supplies may be costly, it may also be necessary if you have a lot of data flowing through your network that would be difficult to replace if lost. It’s not necessarily worth doing all this if the loss of data will not be detrimental to your business or work flow. Installing multiple UPS’s may not even be necessary unless you have a large network in the first place. Understand that even if you do manage a large network, if one area of the network is more important than another area, you may be successful in just installing UPS’s in some areas instead of all areas. The best way to truly know if utilizing uninterruptible power supplies is right for you is to contact an IT specialist in order to evaluate your needs and determine what options are right for you. TVG Consulting is an IT consulting company that is happy to help answer your questions in these matters. Can you imagine our life without electricity? As we use many appliances that need sufficient power supply, it has become essential to make sure that proper and continuous power is available. If not, there will be many disturbances and deviations, right? Huge machinery stops working, data in computers get lost, medical equipment loses accuracy, etc. with unexpected and sudden power loss. Specially designed power-based devices – Uninterruptible Power Supply (UPS) Systems have a great role in providing a good quality power supply continuously even in case of power issues. Let’s now know why it is beneficial to use them. Common Reasons for Power Loss Generally, many natural disasters may disrupt the power supply. Some of the common reasons for power loss are – · Lightning strike · Fallen trees · Floods · Car accidents · Construction or utility accidents · Tornadoes, hurricanes, and strong winds · Power surges, spikes, and dips When such situations happen, it’s difficult for many businesses – they will face many operational and financial risks. Several industries face productivity issues ending up in unnecessary investments. Uninterruptible Power Supply (UPS) Systems – The Best Solution to Avoid Power Loss UPS systems enable the continuous power supply to different types of equipment and, therefore, it is the best solution for industries, residences, offices, and other areas. These systems have a battery charger that provides power supply during power loss. Even they have inverters to give out the desired power voltage. Different types of UPS systems are available in the market – standby UPS, online UPS, and line-interactive UPS. Benefits of Using UPS Systems UPS systems are highly beneficial in many ways. Continuous Operation of Electric Equipment If there is no power due to power-cuts or any other issue, the UPS ensures the continuous operation of electric equipment. So, important sensitive devices like computers and other industrial machinery will not stop their function. There won’t be any hurdles like data loss or reduced productivity. This is, in fact, very much helpful for business, commercial, and residential power-based applications. Protection against Power Issues As you know, sometimes voltage fluctuations, surges, spikes, and so on do arise that may alter the equipment function. Sometimes, they may be damaged temporarily or permanently. UPS provides good quality power that is safe and secured. So, it gives high-levels of protection to different appliances. Refined Power Supply UPS systems do have certain filters do manage the harmonic variations; they regulate the voltage alterations and ensure 100% safety. So, they are successful in providing the refined power supply. This is a very big advantage because there will not be any deviations from the routine industrial or commercial or residential power-based tasks. Consistent Power Quality As the UPS gives out good power quality consistently and continuously, smooth operations are possible. Unwanted elements like poor visual display, sound interruptions, harmonic interferences, voltage disruptions, and so on will be completely reduced. They are so efficient in maintaining perfect power quality. Effective Time Saving During power cuts, computers will stop working suddenly and if your data is not saved, then all your work goes waste. So, within a few minutes, the UPS catches its line and makes you complete your work at the required pace. Not only computers but any other electric equipment will also instantly function immediately after the power cut. So, they save much time and enable effective performance of different devices. So, as you got the benefits of using uninterruptible power supply systems, you can purchase the customized one and fulfill timely power demands. They are useful everywhere – in hospitals, medical centers, banks, TV stations, electronic manufacturers, telecommunication equipment, universities, utility companies, data, and call centers, and so on. Servomax Limited is India’s one of the top-most company manufacturing ultimately standard models of UPS systems. Its customized capacities and models of UPS are trusted, reliable, and 100% safe to use. So, avail its products and cherish the perfect backup power supply for continuous operations. |
What is the use for UPS and what is the advantage?
Postagens relacionadas
direito autoral © 2024 aprendervalor Inc.
