How to do first response pregnancy test

• Do not use after the expiration date stamped on the side of the carton. • Store in a dry place below 86⁰F (30⁰C). Do not freeze. • Keep out of the reach of children. • For in-vitro diagnostic use. Not to be taken internally. • Single-use device. Do not reuse.

INSTRUCTIONS for First Response Gold Digital Pregnancy Test THIS DEVICE SELF ACTIVATES UPON REMOVAL FROM THE WRAPPER. DO NOT OPEN WRAPPER UNTIL YOU ARE READY TO USE. • After reading the insert when you are ready to perform the test, remove the test stick from the foil wrapper and remove the Overcap. (Upon removal from the wrapper, check the Display Screen for the presence of a steady clock symbol . The device is ready for use. Do not use the test unless the steady clock symbol is on the Display Screen.) STEP 1 EITHER • Hold Thumb Grip so that the Absorbent Tip is pointing downward and the Display Screen is facing away from your body. • Place the Absorbent Tip into your urine stream for 5 seconds. Be careful not to get the urine on the plastic holder. During testing, never hold the device with the Absorbent Tip pointing upward. OR • You may collect your urine into a clean, dry cup and immerse the entire Absorbent Tip in the urine for 5 seconds. How to Read Result STEP 2 • While still holding the stick with the Absorbent Tip facing downward, replace the Overcap and lay the stick on a flat, nonabsorbent surface with the Display Screen facing up. • The clock symbol will begin to blink in about 30 seconds after urine is applied to indicate the test is working. STEP 3 • In approximately 3 minutes, an unmistakable ""YES+"" or “NO-” will appear on the Display Screen. INSTRUCTIONS for First Response Early Result Pregnancy Test • After reading the insert and when you are ready to perform the test, remove the test stick from the foil wrapper and take off the Overcap. STEP 1 EITHER • Holding the test stick by the Thumb Grip with the Absorbent Tip pointing downward and the Result Window facing away from your body, place the Absorbent Tip into your urine stream for 5 seconds only. OR • You may also collect your urine in a clean, dry cup and immerse the entire Absorbent Tip into the urine for 5 seconds only. How to Read Result - Read Your Result at 3 Minutes STEP 2 • While still holding the stick with the Absorbent Tip still pointing downward, replace the Overcap and lay stick on a flat, nonabsorbent surface with the Result Window facing up. • You may soon see a pink color moving across the Result Window to indicate the test is working. • Wait 3 minutes before reading results. Step 3 PREGNANT
- TWO PINK LINES in the Result Window. One line may be lighter than the other. Appearance of the results may vary. NOT PREGNANT
- ONE PINK LINE in the Result Window.

1 FIRST RESPONSE detects the pregnancy hormone 6 days sooner than the day of your missed period (5 days before the day of expected period). 2>99% accurate at detecting typical pregnancy hormone levels. Note that hormone levels vary. 3Minkin MJ. Embryonic development and pregnancy test sensitivity: the importance of earlier pregnancy detection. Women's Health (Lond Engl). 2009 Nov;5(6):659-67 †Pharmacy Times OTC Survey 2013††Over 99% accurate in detecting the LH surge in laboratory studies. †Data on file

Statements regarding dietary supplements have not been evaluated by the FDA and are not intended to diagnose, treat, cure, or prevent any disease or health condition.